GoGreenSolar logo

Understanding Rapid Shutdown Requirements for Solar

DIY Solar/
Understanding Rapid Shutdown Requirements for Solar

Most US states require solar energy systems to have rapid shutdown devices. The remaining states will follow soon enough as they switch to more recent versions of the National Electrical Code (NEC).

But what exactly is the rapid shutdown requirement and how do you stay compliant? This article will walk you through it.

What Is Solar Rapid Shutdown?

Solar rapid shutdown devices enable rooftop solar systems to de-energize quickly in an emergency. Without them, there’s no safe way to turn a solar system off. Because even if the inverter is off, solar panels still generate power whenever the sun is shining.

So if there’s been an emergency, and you’ve called firefighters, there usually isn’t time to figure out how to deal with live solar conductors.

That’s why rapid shutdowns became an electrical safety requirement in the National Electrical Code (NEC). The main purpose is to keep first responders safe from exposure to live electricity sources.

Differences Between NEC 2014 and NEC 2017

A new version of NEC code is released every 3 years. While the most recent one was released in 2020, 18 states still use NEC 2017. Moreover, when it comes to rapid shutdown requirements, there aren’t any significant differences between NEC 2017 and NEC 2020.

Rapid shutdown requirements first appeared in NEC 2014 and became more specific in NEC 2017. So let’s take a closer look at the differences between NEC 2014 and NEC 2017.

Rapid Shutdown Device Location

  • NEC 2014: Makes no mention of the location of the device that starts the rapid shutdown process.
  • NEC 2017: Clarifies that the rapid shutdown initiation device must be in a readily accessible location outside the building.

Distance From the Solar Array

  • NEC 2014: PV conductors inside a building, more than 10 feet from the array or more than 5 feet long, must be shut down to 30 volts or less within 10 seconds of rapid shutdown initiation.
  • NEC 2017: PV conductors inside a building, more than 1 foot from the array or more than 3 feet long, must be brought down to 30 volts within 30 seconds. Conductors within the array must be brought down to 80 volts within 30 seconds.
NEC adoption across the US as of October 2022

Why Is Rapid Shutdown Required for Solar?

As mentioned, rapid shutdown is required as a fire safety measure. In the unfortunate event of a fire, first responders typically get on the roof to access the upper floors and vent smoke out of the building.

If there’s sun, your PV array is generating voltage which could be dangerous to firefighters who need to focus on putting out the fire without worrying about the potential dangers of high-voltage PV conductors. A rapid shutdown system removes this danger with a single switch or button.

How to Meet the Solar Rapid Shutdown Requirements

The first step is to determine which version of the NEC code is enforced for solar installations in your city or county.

If it is NEC 2014 or higher, a rapid shutdown system will be required. Then, the easiest way to meet rapid shutdown requirements is to install a system that is already listed or field labeled with rapid shutdown capabilities. For example, the SolarEdge system incorporates DC optimizers at every solar panel, while Enphase incorporates microinverters installed at every panel. These devices shut off the power around and within the solar array at the flip of a switch, so there is no need for additional equipment.

Read more: SolarEdge Power Optimizer vs. Enphase Microinverter

You still have options if you want to install a more traditional central inverter. For NEC 2014 compliance, include a rapid shutdown device on the roof at the edge of the PV array and link it to the switch at ground level.

To meet NEC 2017 requirements, install module-level equipment to manage the rapid shutdown at each solar panel. Remember, you need to install it at the same time as the solar panels.

Install a NEC-Compliant Solar System

When in doubt, reach out to our experts to ensure that your solar installation will comply with rapid shutdown requirements. They will walk you through the whole process of choosing the right equipment for your project and ensuring your solar energy system complies with NEC.

Read this next

Solar Calculator

Solar Calculator

Use our easy solar panel calculator to get a quick estimate of how many solar panels you’ll need for your home.

Size My Solar Calculator
Free Solar Roof Layout

Free Solar Roof Layout

Our engineers use state-of-the-art software to conduct a PV analysis and draft a free layout of solar on your roof, included with our complimentary quote.

Get My Free Layout

Get Started With Solar

We’ll help you figure out your solar needs!

Fill out the form for a complimentary solar quote that includes a custom satellite layout and a breakdown of solar energy production, federal tax credit and energy offset.

Get free estimate